Primary Uses: Finishing Logs, Wood Siding, Fences or any other Vertical Wood Surface
Shipping Time: 3-5 Business Days
Availability: In Stock
Product Description: UV GUARD II was developed for use as an exterior wood finish for log homes and quality wood siding. It is also very effective when used as a coating on fences, shingles and other vertical surfaces. UV GUARD II is also safe to use on interior wood surfaces and is especially good for areas that receive extra amounts of sunlight. Do not use on high density, high oil content or exotic woods. UV GUARD II is an exterior acrylic wood finish that contains highly advanced UV absorbers and stabilizers. These unique and effective additives give greater protection and longevity to wood surfaces that are continuously exposed to the harmful and destructive ultraviolet rays of the sun.
Apply (1) coat of UV GUARD II stain followed by (1) coat of UV GUARD ADVANCE Clear Wood Finish. The temperature range should be between 40°F and 90°F. Do not apply when hot, wet or windy weather conditions are expected within 36 hours. Always wait for moisture to dry before application. Allow 24-48 hours for complete dry. The temperature and humidity conditions may necessitate a longer drying period. Finally, depending upon the method of application and the porosity, texture and dryness of the wood, allow 200 - 400 square feet per gallon for your coverage rate. Clean up immediately with soap and water.
- 2 Coat-System
- Superior UV Protection
- Easy Application by Brush or Spray
- Safe For Interior or Exterior Use
- Excellent Moisture Protection
- Engineered Green Qualified- Low VOC Formula
- Water Clean Up
- Low Odor & Compatible with Most Chinking & Caulking Materials
Limited 3 & 5 Year