Primary Use: Sealing Interior or Exterior Logs, Siding or Fences
Shipping Time: 3-5 Business Days
Availability: In Stock
Nature’s Edge Wood Finish is optimized to deliver our penetrating natural long oil alkyd resin into the wood with non-polluting water as our solvent. The fact that our waterborne oil penetrates into the wood instead of forming a film on the surface is vital to both protection and longevity. When applied and maintained properly Nature’s Edge will preserve and protect the beauty of wood from the assault of sunlight, wind and water. All exterior wood finishes require maintenance and none can be expected to last forever without it. While the interval between maintenance coats is highly dependent upon environmental conditions, we and many others strongly believe Nature’s Edge wood finish is the preferred choice for long term wood protection.
Apply (2) coats of Nature's Edge Transparent Wood Finish. The temperature range should be between 40°F and 90°F. Do not apply when hot, wet or windy weather conditions are expected within 36 hours. Always wait for moisture to be below 20%. Allow 24-48 hours for complete dry. The temperature and humidity conditions may necessitate a longer drying period. Finally, depending upon the method of application and the porosity, texture and dryness of the wood, allow 200 - 400 square feet per gallon for your coverage rate. Clean up with soap and water.
- Environmentally Friendly
- Low VOC Formula & Biocide Protection