|
Log Home Products
How Much Do I Need?
Technical Advice
Newsletter
|
|
|
Availability: In-Stock
Shipping Time: 3-5 Business Days
Warranty: Limited Lifetime
Description:
UV GUARD Textured Caulk may be used where a narrower bead with blended
natural appearance is preferred, for instance, on Full Scribe, Tongue
& Groove and D-Log Homes. It is also recommended for use on corners
and other dynamically moving joints such as green log construction,
where shrinkage may be substantial and backer rod may not be used.
Other uses include: Siding (Log or Sawn Slab), corners and checks in
logs. UV GUARD Textured Caulk is an excellent restoration/repair
product for previously applied mortar chinking, mastics and glossy
caulks. Finally, UV GUARD Textured Caulk is a highly elastic, textured caulk formulated from 100 percent pure acrylic resins.
|
|
Caulking Application Tips:
- Start with dry logs. Their moisture content should be below 20%.
- Apply log stains before installing the caulking material.
- Clean your logs prior to applying any caulking material. Any loose
debris, dirt, dust or grease could adversely affect the adhesion of
your chinking.
- Install backer rod before applying any log home caulking products. Backer rod is available in closed cell and open cell forms.
- Select a caulking material that is going to be compatible with your
log home stain. If you are unsure about the compatibility of your log
caulking and your log home stain then speak with the manufacturers of
both products.
- Do not apply caulking in direct sunlight. This could lead to blisters in the material.
- Apply 2 to 3 feet of material at a time and then work the material with a foam brush or trowel.
- Use a spray bottle to mist the caulking if it dries too quickly.
- Clean as you go. Soap and water can be used if the material has not dried.
- Caulking should not be installed to a depth greater than 1/4.
- Avoid caulking in the rain or when rain is imminent.
- Caulking should not be applied when temperatures are below 40° or when subfreezing temperatures are expected within 48 hours of application.
|
|
What is the difference between chinking and caulking materials?
Chinking
is an elastic sealing material that has a coarse surface which is
designed to look like old-fashioned mortar and is typically used on
larger joints. Caulking is a highly elastic sealing material that has
no surface texture and is mainly used in smaller joints.
Should I caulk or stain my log home first?
It
is best to apply a stain that is compatible with the caulking first.
The stain acts as a primer for the chinking and normally improves the
overall adhesion of the caulking material. Additionally, it makes the
clean up process for the log home caulking material much easier.
What type of tool should I use in order to apply my caulking material?
Most applicators use foam brushes. Others use steel or plastic trowels.
Do I need to chink or caulk my log home?
At some point you will probably need to caulk or chink your log home.
What do I do to my caulking when its time to re-stain?
Nothing. Simply brush or spray your stain material over top of the existing caulking material.
Can I stain overtop of the caulking on my home?
Yes. Most stains will wet-out and adhere to most caulking products.
Do I need to maintain my caulking material?
No. If the caulking material is properly installed, there should be very little maintenance work down the road.
How do I fix my caulking if it is torn?
The
entire process is rather easy. Begin with a clean surface. Gun the new
caulking material over the torn area, and tool the new caulking
material onto the old caulking material. The old and new caulking
material should bond together. Make sure to get a good bond to the wood.
|
Available Colors
UV GUARD Textured Caulk is available in Yellowstone, Dark Brown, Standard Tan, Southern Gray, Golden Honey, Western Tan, Tahoe Gold and Adobe. Custom Colors are also available.
Texture
UV GUARD Textured Caulk is available in a semi-matte sand texture. It can be tooled to achieve a semi-smooth to rough finish.
Recommended Thickness
Troweled thickness should be between 1/8 to 3/16 when backing is used and 3/16 to 1/4 without backing.
Physical Properties
Composition Textured Acrylic Latex
Viscosity Trowel Grade
Density 14 lbs. /gal ±
VOC 25g/l
PH 8.5-9
84% Solids
50% Elongation
Temperature Range -40° F. to 250° F.
Odorless when dry
Non-toxic
2 Year Shelf Life
Salt Spray Stable
ASTM-C834
Coverage
The guide on the back of this page is offered to assist in estimating coverage and quantities required. Measure the total number of linear feet of log joint, exterior and interior, and estimate the average width of the finished caulk joint. Remember to include corners, door and window bucks, gable lines, purlin and joist notches, etc., in addition to the horizontal caulk lines if they are to be caulked.
Drying Time
UV GUARD Textured Caulk will be skinned over on the surface in 20-30 minutes and will be surface dry in 8-10 hours under normal conditions. It will be fully cured in 1-3 weeks. Actual times will vary depending on temperature and relative humidity. Caulking should be protected from contact damage for at least 1 week after application.
Packaging
UV GUARD Textured Caulk is available in 5 gallon pails, 30 oz. cartridges and 10.3 oz. cartridges.
Storage
UV GUARD Textured Caulk must be protected from freezing and stored in temperatures that do not exceed 90° F. Opened containers may be stored by floating a thin film of water (1/16) on the surface of the material, covering it with plastic, and tightly relidding the container.
Clean Up
Clean uncured UV GUARD Textured Caulk immediately from tools, hands and equipment with soap and water. If the material is allowed to dry, it may need to be removed with a solvent.
|
|
If you find an identical item priced lower at a different online store, Mountain Home Building Products will
MATCH their price and GIVE YOU $10 off your next order.
Proof of the competitors price including shipping and handling fees must be provided via email or communicated with one of our representatives.
|
|
|
Shopping Cart
