|
Packaging
One gallon pails, five gallon and 1⁄4 pint samples available.
Coverage Rate
1st Coat: 200-300 per sq. ft./gal
2nd Coat: 300-400 per sq. ft/gal
Mildecide
Powerful fungicide, mold and mildecide inhibitors have been added to
significantly reduce the likelihood of airborne intruders interfering
with your family’s health.
Low VOC
Our renewable natural oil formula is optimized to provide wood penetration and performance at extraordinarily low levels of Volatile Organic Compounds (VOC). VOC’s are pollutants emitted into the atmosphere principally from the high levels of solvents found in the conventional solvent borne and water based stains on the market today. At a VOC level of 95 grams/liter, Nature’s Edge is among the greenest wood finishes available anywhere, far exceeding both the VOC regulations for today and well into the future.
Application Range
Our wood finish products can be applied in temperatures ranging from 40 degrees Fahrenheit to 90 degrees Fahrenheit. This wide temperature range significantly extends the application season, which could mean the difference between finishing your home on time and having to wait until the next season. It is very important to apply any wood finish within the manufacturer’s recommended temperature range; otherwise, the finish may fail prematurely.
Application
Nature’s Edge Wood Finish can be applied with an airless sprayer, brush or roller.
Moisture Content
A major benefit of waterborne technology is that our finishes can be applied to wood containing as much as 25% moisture content. You can, therefore, apply our finishes as a part of the home’s building process, as opposed to having to wait months, and sometimes years, to finish it. Clean Up
Clean up is a snap - just rinse with soap and water.
|