|
Packaging
One gallon pails, five gallon pails and 1⁄4 pint samples available.
Coverage Rate
1st Coat: 150-300 sq. ft./gal
2nd coat: 250-450 sq. ft./gal.
(As with all stains, coverage will vary depending upon roughness of the wood.)
Recommended Film Thickness
3 mils (use a gauge if in doubt)
Application Range
Surface
temperature should be 40°F (4°C) and rising to 90°F (32°C) and falling.
The coating should be applied and allowed to dry within this
temperature range. Application and curing below the minimum risks slow
drying which could lead to rain or snow damage. Application above the
recommended maximum risks drying too fast, with poor penetration into
the wood.
VOCs
Less than 550 grams/liter VOC compliant formula: Less than 250 grams/liter
Compatibility
Transformation
is recommended for use with all other Sashco products. It also works
well with most other caulking/chinking, and clear exterior coatings.
Please contact Sashco for details on specific compatibility questions.
Dry Time
Transformation
dries to the touch in 30 minutes or less in ideal weather. However, we
recommend applying the 2nd coat the next day (rather than doing both
coats the same day).
(Note: When cold and/or
humid nights are expected, apply coatings no later than mid-afternoon
to allow adequate drying time before exposure to severe conditions.)
Viscosity
Brookfield LVF, 30-40 cps; spindle #2, 60 rpm
Density
7.0 - 7.5 lb./gal.
Solids
38-40%, depending on color
Odor
Mild, mineral spirits
Freeze-thaw
Passes at least 5 cycles
| 
Shopping Cart
