|
Log Home Products
How Much Do I Need?
Technical Advice
Newsletter
|
|
|
Manufacturer: Weatherall
Availability: In-Stock
Shipping Time: 3-5 Business Days
Warranty: Limited
Number of Coats: 2 coats
Description:
SuStain is a premium semi-transparent penetrating oil based stain developed for use over existing oil or water based finishes. It beautifies and protects logs, wood siding, fencing and other vertical surfaces. It can be used on new wood and interior surfaces. SuStain is an advanced, exceptionally strong and highly protective stain formulated to provide outstanding water resistance, ultraviolet resistance and color retention. This amazing product enhances the natural beauty of the wood and allows
the grain to show through.
|
|
Stain Application Tips:
SuStain can be easily applied by natural bristle brush, airless sprayer or pump style sprayer. If spray application is used, back brushing is mandatory. When using a pump or airless sprayer, work small areas thoroughly back brushing the work to insure proper penetration. Look frequently for runs, especially from checks and split grain and back brush as required. Although a one-coat application is normally sufficient, a second coat may be necessary depending on the condition of the previous finish and the porosity of the wood. Keep in mind that additional coats may affect the final color. Apply second coat within 12 hours of the first coat for best results. Over application of this product may result in a glossy appearance, extended drying times or sagging. Do not thin.
Dispersion
Thoroughly stir the contents of the pail to disperse any added pigments evenly. If pigments are added, a very slight color difference may occur from pail to pail as well as when the finish is not thoroughly stirred. To avoid any variations, a good technique is to blend all pails of the same color then stir thoroughly prior to use. Continue to stir periodically during application.
Temperature and Weather
Prior to application of SuStain, check the temperature of the wood surface and the projected ambient temperatures. SuStain should not be applied to wet or frozen wood, in subfreezing temperatures or when subfreezing temperatures are expected within 24 hours of application. We do not recommend application in continuing wet weather. SuStain applied during colder, humid weather will take longer to dry. If rain is imminent, do not apply product. After heavy rain, wood surfaces should be given several days to dry before application. If weather is hot and sunny, it is best to work around the house so you are always in the shade. Do not apply SuStain to hot surfaces. Best when applied between 40-90 degrees.
|
- How often do I need to restain my log home?
- A good stain should last between 2-3 years on the southern exposure of the home and 3-4 years on the other sides of the home.
- What is the difference between oil based stain and water based stain?
- Oil
based stains have a strong odor, are user friendly, produce a natural
looking finish and require the use of solvents during the clean-up
process. Water based stain products are environmentally friendly, odorless but
can be a little more difficult to apply.
- What steps should I take before staining my log home?
- 1.) Make sure your logs are clean and sound.
- 2.) Make sure the surface temperature of the logs are between 50-90 degrees.
- 3.) Make sure the weather forecast is dry for two days during the
staining process and dry for a two days after the staining process.
- 4.) Make sure the moisture content of the wood is below 20% prior to the staining process.
- 5.) Make sure that you don’t have any compatibility problems with any previously applied coatings.
- 6.) Read all of the application guidelines for the stain material that is being applied.
- 7.) Recommendation: Use a sprayer to flood the surface of the logs with
the stain material and then immediately back brush the stain into the
pores of the wood.
- Do your stains contain a mildewcide?
- Most stain products have a standard amount of mildewcide in
them. We recommend adding an additional mildewcide packet if you live
in an area that is prone to high humidity and high temperatures. We
sell a mildewcide additive called Stayclean I/E.
- Is the UV protection in the stain or clear coat?
- The stain has a combination of pigments and UV-absorbers while the clear coat only has UV-absorbers.
|
Available Colors
Standard colors are: Brown Cedar, Red Oak and Golden Aspen. SuStain is also available in natural clear and can be tinted using universal tints from a quality paint store to match almost any color.
Physical Properties
Viscosity 30-40, #4 Ford cup
Density 8.3 +/- 0.1 lbs. /gal.
VOC 249 g/l
% Solids 45%
Odor mild mineral spirit
Low Toxicity
3 Year Shelf Life
Coverage
250-300 sq. ft. /gallon on previously coated surfaces. 150-250 sq. ft. / gallon on new wood.
NOTE: Coverage will vary depending on type and texture of wood surface.
Drying Time
Drying times will vary depending on the temperature and relative humidity. SuStain may still be tacky after 12 hours. Allow for 1-2 days for full curing.
Packaging
SuStain is available in 5 gallon and 1 gallon pails.
Storage
Store product in a tightly sealed container in moderate temperatures (between 40° F. and 90° F.).
Clean Up
Clean up immediately with mineral spirits. Spray equipment should be cleaned immediately per the equipment manufacturer’s recommendations. Dispose of excess materials by following all local, state and federal environmental disposal regulations.
Caution: Rags and any other materials soaked with SuStain may spontaneously catch fire if improperly discarded. Properly dispose of rags and other materials in metal containers filled with water.
|
|
If you find an identical item priced lower at a different online store, Mountain Home Building Products will
MATCH their price and GIVE YOU $10 off your next order.
Proof of the competitors price including shipping and handling fees must be provided via email or communicated with one of our representatives.
|
|
|
Shopping Cart
