Chinker's Edge- (10) 29oz Tubes

Manufacturer: Sashco
Availability: In-Stock
Case Quantity: 10 Tubes
Shipping Time: 3-5 Business Days
Warranty: 10 Year

Description:
Chinker's Edge helps speed up your application process while offering more texture on the surface than most other chinking materials. It is the only chinking to provide a true "historical" appearance. Chinker's Edge is a great product for the do it yourself market because it is easy to apply. No other chinking offers the same high quality performance. Chinker’s Edge makes your work go faster! It gives you the edge in tooling and clean up—savings as high as 20% in labor costs or application time.  Tooling is unbelievable easy, and, because little to no water is needed in the tooling process, clean up is practically eliminated. And, Chinker’s Edge performance is guaranteed with a 10-year warranty, or when used with any of Sashco’s stains,(Capture/Cascade or High Sierra Log Stain, or for interior log treatment, Symphony Clear Coat) a Limited Lifetime Warranty. Get the edge, Chinker’s Edge.

Chinking Installation Tips:

1. Start with dry logs. Their moisture content should be below 20%.
2. Apply log stains before installing the chinking material.
3. Clean your logs prior to applying any chinking material. Any loose debris, dirt, dust or grease could adversely affect the adhesion of your chinking.
4. Install backer rod before applying any chinking products. Backer rod is available in closed cell and open cell forms.
5. Select a chinking material that is going to be compatible with your log home stain. If you are unsure about the compatibility of your log chinking and your log home stain then speak with the manufacturers of both products.
6. Do not apply chinking in direct sunlight. This could lead to blisters in the material.
7. Apply 2 to 3 feet of material at a time and then work the material with a foam brush or trowel.
8. Use a spray bottle to mist the chinking if it dries too quickly.
9. Clean as you go. Soap and water can be used if the material has not dried.
10. Chinking should be installed to a depth of 1/4”.
11. Avoid chinking in the rain or when rain is imminent.
12. Chinking should not be applied when temperatures are below 40° or when subfreezing temperatures are expected within 48 hours of application.

What is the difference between chinking and caulking materials?

Chinking is an elastic sealing material that has a coarse surface which is designed to look like old-fashioned mortar and is typically used on larger joints. Caulking is a highly elastic sealing material that has no surface texture and is mainly used in smaller joints.

Color
Mortar White, Buff, Pecan, Light Gray, Khaki

Packaging
5-gallon straight-sided tan pails and 29oz. fiber cartridges

Water Resistance
Chinker's Edge forms a water resistant skin in 1-4 hours after application. This resistance depends on bead size, humidity and temperature. If applied in cool or humid weather and rain is imminent, covering the chinking with a plastic sheet may be necessary.

Service Range
-30°F to 250°F

Paintability
Paintable with oil or latex stains after 1 week cure time. If giving chinking a facelift with Brush Over, make sure chinking is cured.

Compatibility
Compatible with most sealers and preservatives, including linseed oil, borates, pentachlorophenol and copper compounds. NOTE: Some coatings contain wax or other chemicals, making adhesion difficult. Call Sashco for more information.

Shelf Life
18 months from date of packaging.

Passes
ASTM C834-00 Latex Sealing Compounds, ASTM G-53 QUV
Accelerated Weathering: 4,000 hrs
ASTM D-638 Max 250%, Tensile Strength 36psi, after 28 days room temperature cure
ASTM C-920 (12.5)

VOC
0.28 lbs/gal; 34 g/liter

Warning
This product contains a chemical(s) which is reported by the State of California to cause birth defects or reproductive harm.

Adhesion ¹ ² (180° Peel)
Call Sashco for stain compatibility with Chinker's Edge

Cure-Through Time
3 weeks (1/2" thickness. 70°F, 50% relative humidity)

Viscosity
Approximately 280,000 cps at 10 rpm, spindle #14

Freeze-Thaw
Passes at least 5 cycles (0°F to 70°F)

Hardness (Shore A)
29

Slump
1/16" (Max) in test joint (3-1/2"H x 3/4"D) at 70°F

Stain
None

Elongation @ Break
550%

Tack-Free Time
Less than 30 minutes (70°F, 50% relative humidity)

Water Resistance
No washout (4 hours; 40°F, 50% relative humidity)

Weathering
Washout - None
Cracking - None
Discoloration - Passes ASTM C834-00

Snow
Be cautious of areas where snow builds up around the structure and remains for extended periods of time. Snow removal is recommended for these areas to ensure the ultimate adhesion of Log Jam.

¹ Ultimate adhesive strength attained in 3-6 weeks depending on bead size, temperature and humidity.
² Dry adhesion is tested after 28 days room temperature cure. The average of several tests is reported.

Our Buy Now Guarantee

If you find an identical item priced lower at a competitor, Mountain Home Building Products will match that price and give you $10 off your next order. Proof of the competitors price including shipping and handling fees must be provided via email or communicated with one of our representatives. Offer valid 30 days from the date of purchase.